Accessories

  • Straight Six Rev 4 ManifoldStraight Six Rev 4 ManifoldQuick View
    • Straight Six Rev 4 ManifoldStraight Six Rev 4 ManifoldQuick View
    • ,

    • Straight Six Rev 4 Manifold

    • $599
    • This is the Hyde Motor Works Straight Six Manifold (SS in short) is an aluminum manifold made in house for forced induction use. This manifold replaces the stock BMW 6 cylinder engine intake manifold  and hold up in Supercharger & Turbocharger applications where high boost is involved. It can also be used with naturally aspirated engines. These manifolds work on the BMW  M50, M52 & S52 Engines. They require the M54 intake runner adapter for the M54 & M52TU Engines.  
    • Add to cart
  • Silicone Hose KitSilicone Hose KitQuick View
    • Silicone Hose KitSilicone Hose KitQuick View

    • Silicone Hose Kit

    • $226
    • A set of silicone hoses & couplers meant for our V2 supercharger kit, Also can be used with the V3 & V4 supercharger kits* Note: The M1 Kit does not use this silicone hoses and instead uses the intercooler setup. If you are buying and intercooler setup then that should have majority of pieces and you wont require it. Note: Available on pre-order.
    • Add to cart
  • Intercooler & Piping KitIntercooler & Piping KitQuick View
    • Intercooler & Piping KitIntercooler & Piping KitQuick View

    • Intercooler & Piping Kit

    • $428
    • An off the rack budget friendly 2.5" ID intercooler kit with good flow characteristics, The intercooler is modified to work well with all the HMW setups. 28" Black Aluminum intercooler with 2.5" ID Piping Kit. (See product description and additional information below for all details)
    • Add to cart
  • Radiator Top Hose AdapterRadiator Top Hose AdapterQuick View
    • Radiator Top Hose AdapterRadiator Top Hose AdapterQuick View

    • Radiator Top Hose Adapter

    • $20
    • These 40mm hose adapters with the water temperature probes are made to easily modify to the existing top radiator hose, it is meant for the V2, V3 & V4 Kits, while the M1 uses it own top radiator hose. You can use this throughout the BMW M5x, S5x & M4x range of engines. Comes with two hose clamps and a temperature probe.
    • Add to cart
  • HMW 80MM SC14 PulleyHMW 80MM SC14 PulleyQuick View
    • HMW 80MM SC14 PulleyHMW 80MM SC14 PulleyQuick View
    • , ,

    • HMW 80MM SC14 Pulley

    • $183
    • This HMW 80MM pulley for the SC14 will push between 6 - 8 PSI for the 6 cylinders & 15-20PSI on the 4 cylinders. Made as an High boost pulley for the V2 & V4 SC14 setups. Complete bolt on upgrade to an SC14 supercharger. Recommended to use this only after your installation and setup has been completed and you ensured there are no boost leaks, are happy with how the car runs, overall smoothness of the engine & a proper tune. Consider this the final touch. Currently available on back order, back in stock in January 2021.
    • Add to cart
  • Supercharger BearingsSupercharger BearingsQuick View
  • Fuel InjectorsQuick View
    • Fuel InjectorsQuick View

    • Fuel Injectors

    • $391 – $489
    • A set of six (6) high resistance fuel injectors which replaces the Bosch EV1/EV6 style injectors found in the BMW 6 Cylinder M50, M52, M54, S50, S52, S54 engines. Available in either 42Ibs (440cc) or 60Ibs (600cc) sizes.
    • Select options
  • HMW Grill BadgeHMW Grill BadgeQuick View
    • HMW Grill BadgeHMW Grill BadgeQuick View

    • HMW Grill Badge

    • $20
    • This is a high quality grill badge made originally for our special clients builds. This badge is molded and then handcrafted to a great degree. It attaches to your cars front grill with its threaded studs and bolts and backing plate. Display your support for our work and the kit you use.
    • Add to cart
  • Spare PartsSpare PartsQuick View
  • AMR 500 SuperchargerAMR 500 SuperchargerQuick View
  • SC14 SuperchargerQuick View
  • M122H SuperchargerQuick View
×
×

Cart

Close Panel

Item added to your cart

0 items in the cart ($0)

Continue Shopping Go To The Cart