M62 Supercharger Pulley (60MM)

For Eaton M62 Supercharger

$205

This Hyde Motor Works 60 mm pulley including the bearing, made for the Eaton M62 Supercharger will push between 6 – 8 PSI for the BMW 6 cylinder engines and 12 PSI on the BMW 4 cylinder engines. It has been designed as a high boost pulley for the Hyde Motor Works V3.62 and V4 WMD Supercharger Kits and is a complete bolt on upgrade to the supported Eaton M62 superchargers, as listed below.

It is recommended to use this pulley only after your installation and setup has been completed and you ensured there are no boost leaks, you are happy with how the car runs and with the overall smoothness of the engine and the proper tune. Consider this the final touch.

PRODUCT OVERVIEW

 

Description

This machined purpose build Hyde Motor Works 60mm Pulley is meant to get more boost out of your Eaton M62 Supercharger. It is a fixed pulley and good for achieving the maximum recommended safe boost for a stock engine and most of what the M62 Supercharger can support, while staying efficient and safe. This is a fixed pulley, so you won’t be able to use the clutch. It will also require a smaller belt.

Works with the Eaton M62 Supercharger for the Mercedes Benz with Part Numbers A1110900380, 1110900380, A1110960099KZ found in the following:

1998-03 Mercedes C Class C230 2.3L, I-4,

1998-04 Mercedes SLK230 Roadster 2.3L, I-4, M62 3rd

2002-04 Mercedes SLK32 AMG Roadster 3.2L V6

2000 Mercedes Benz C320 3.2L V6 All SLK

Includes the correct bearing

Good for built 6 or 4-cylinder BMW engines that use the Hyde Motor Works kits supporting the above listed Eaton M62 supercharger. On 6 Cylinder M50/M52/M54/S50/S52/S54 engines, the boost should be between 5-8 PSI.  On the M44/M43/M42 or similar stock BMW 4-cylinder engines the boost will be higher at 12 PSI+.

If you are using this pulley on your supercharger, ensure you use new high quality OEM or upgraded bearings and seals on your supercharger to avoid bearing failure.

Please check our Product Finder for all parts available in our shop necessary for this setup.
For more information on our custom pulleys, please check the overview on Our Products page.

Additional information

Weight .600 kg
Fitment

Fits all M62 Superchargers with Mercedes Benz with Part Numbers A1110900380, 1110900380, A1110960099KZ found in the following:

1998-03 Mercedes C Class C230 2.3L, I-4,

1998-04 Mercedes SLK230 Roadster 2.3L, I-4, M62 3rd

2002-04 Mercedes SLK32 AMG Roadster 3.2L V6

2000 Mercedes Benz C320 3.2L V6 All SLK

Boost Output

Dependent on Motor & Intercooler used.
6-8 PSI on BMW 6 cylinder M5x/S5x motors
12+ PSI on BMW 4 cylinder M4x motors

Technical Details:

Machined Aluminum, Silver, Laser Engraved. 4x M6 Threaded holes and grooved shaft.