• V2x SC14 Supercharger Kits V2x SC14 Supercharger Kits Quick View
    • Sale!
      V2x SC14 Supercharger Kits V2x SC14 Supercharger Kits Quick View
    • ,
    • V2x SC14 Supercharger Kits
    • $950.00$1,550.00
    • The award winning V2 based supercharger kits using the 1.4L SC14 roots supercharger. Complete support for all M50/M52/M54/S50/S52/S54 motors, slight variations for the Z4 & E30 chassis. A very strong setup for those who are new and are looking to add an additional +50-100RWHP to a stock motor. Average Power Curve: 260-300RWHP @ 5900 RPM Absolute Max Recorded Power: [email protected] 6200 RPM (See performance specifications below for more information)
    • Select options
  • M122H KC Supercharger Kit M122H KC Supercharger Kit Quick View
    • M122H KC Supercharger Kit M122H KC Supercharger Kit Quick View
    • ,
    • M122H KC Supercharger Kit
    • $2,350.00
    • This is the single most largest supercharger setup available for the BMW's yet. The setup makes use of the notorious Eaton M122H or an Eaton TVS 2300 Supercharger, found on the Mustang GT500 which is OEM capable of flowing 650HP. The M122H alone pushes 14 PSI out of the box and that is with an air to air intercooler. Boost can be restricted to 9PSI. And its capable of adding an extra 250-300+ HP to your usual M5x – S5x motor as long as the motor can handle it. Average Power Curve: 300RWHP - 450RWHP @ 5700 RPM (See performance…
    • Add to cart
  • V3 Eaton Supercharger Kit V3 Eaton Supercharger Kit Quick View
    • Out of Stock
      Sale!
      V3 Eaton Supercharger Kit V3 Eaton Supercharger Kit Quick View
    • ,
    • V3 Eaton Supercharger Kit
    • $1,150.00 $800.00
    • This is a nice budget alternative to the traditional setups we offer, the V3 is based around utilizing the more efficient Eaton Superchargers. Based on the Eaton M62 & M90 superchargers with the short snout and body type commonly found in Jaguar V8, Mercedes Kompressor, Aston Martin & Ford Thunderbird. This Kit supports both the M62 & M90 Superchargers. * Includes V3 Eaton M62/M90 Bracket Kit, Throttlebody Relocation Dummy Manifolds, M62/M90 Supercharger Manifolds, Spacers, Nuts & Bolts, Idler Pulleys, - All Powdercoated - 24 Months Craftsmanship Warranty** - Personal Support. Note: This kit includes all hardware and pipe work. To…
    • Add to cart
  • V4 MOAB Supercharger Kits V4 MOAB Supercharger Kits Quick View
    • Out of Stock
      V4 MOAB Supercharger Kits V4 MOAB Supercharger Kits Quick View
    • ,
    • V4 MOAB Supercharger Kits
    • $750.00$1,200.00
    • The V4 supercharger kit is for the BMW 318ti, 318i, 316i, & Z3 4 cylinder enthusiasts with the M42, M43 & M44 motors. This kit supports 4 different superchargers: The AMR 500, Eaton M45, M62 and the SC14. All the setups can be intercooled. Now you have the option of using any supercharger you like, all at a fraction of the cost.
    • Select options
  • HMW SS Manifold HMW SS Manifold Quick View
  • HMW 80MM SC14 Pulley HMW 80MM SC14 Pulley Quick View
    • HMW 80MM SC14 Pulley HMW 80MM SC14 Pulley Quick View
    • , ,
    • HMW 80MM SC14 Pulley
    • $130.00
    • This HMW 80MM pulley for the SC14 will push between 6 - 8 PSI for the 6 cylinders & 15-20PSI on the 4 cylinders. Made as an High boost pulley for the V2 & V4 SC14 setups. Complete bolt on upgrade to an SC14 supercharger. Recommended to use this only after your installation and setup has been completed and you ensured there are no boost leaks, are happy with how the car runs, overall smoothness of the engine & a proper tune. Consider this the final touch.
    • Add to cart
  • Customized 2.5″ Intercooler & Piping Kit Customized 2.5″ Intercooler & Piping Kit Quick View
    • Sale!
      Customized 2.5″ Intercooler & Piping Kit Customized 2.5″ Intercooler & Piping Kit Quick View
    • Customized 2.5″ Intercooler & Piping Kit
    • $250.00 $220.00
    • An off the rack budget friendly 2.5" ID intercooler kit with good flow characteristics, The intercooler is modified to work well with all the HMW setups. 28" Black Aluminum intercooler with 2.5" ID Piping Kit. (See product description and additional information below for all details)
    • Add to cart
  • Whiteprints Quick View
    • Whiteprints Quick View
    • , ,
    • Whiteprints
    • $225.00
    • Set of live whiteprint templates full sized including CAD files from HMW, licensed to your name for personal use. This will get you started from scratch! Available for V2.1X regular 6 cylinder's, V2.2Z for the Z4, V2.E30 for E30 Chassis, V3 Eaton M62/M90 & V4 M.O.A.B. (4 cylinder). Supports the following motors: M50B25, M50TUB25, M52B28, M52TUB28, M54B30, M54B25, S50B30, S50B32, S52B32, S54B32. The HMW M122H KC whiteprints are not publicly available.
    • Select options
  • AMR 500 Supercharger AMR 500 Supercharger Quick View
  • SC14 Supercharger Quick View
  • M122H Supercharger Quick View
×
×

Cart

Close Panel