Eaton M62 Supercharger Pulley (75MM)
Works with Mercedes Eaton M62 Supercharger
$284
This fixed 75mm pulley is made by us as a bolt on upgrade for the Mercedes Eaton M62 Supercharger.
It has been designed as overdrive pulley that takes the Supercharger to its safe limits and can be used with the V3.62 & Nemesis I Supercharger kits.
This is also an upgrade pulley for the Mercedes Kompressor line of cars such as the C230, K230, SLK32, C320 that have the stock pulley. This allows a 50HP + increase with a proper tune.
Its recommended to upgrade your existing supercharger bearings to avoid failure.
Pre-Order Product: This product is available on a special Pre Order. Full deposit is required for us to accept your pre order. The estimated time frame of delivery is Late December 2024 – Early January 2025.
All terms and conditions apply. Contact us directly for any questions.
Available on backorder
75MM EATON M62 SUPERCHARGER PULLEY
This CNC machined Hyde Motor Works 75 mm Pulley is meant to get more boost out of your Eaton M62 Supercharger. It is made to get the maximum recommended safe boost that the Eaton M62 Supercharger can support on most engines while staying efficient and safe.
NOTES:
- Includes the correct bearing and spacer.
- This is a fixed pulley, so you won’t be able to use the clutch. It will also require a smaller belt.
- If you are using this pulley on your supercharger, ensure you use new high quality OEM or upgraded bearings and seals on your supercharger to avoid bearing failure.
- This pulley is the suggested upgrade pulley for all Hyde Motor Works kits that uses the Eaton M62 Supercharger.
- It is recommended to use this pulley only after your installation and setup has been completed and you ensured there are no boost leaks, you are happy with how the car runs and with the overall smoothness of the engine and the proper tune. Consider this the final touch.
- Adding this pulley will result in more boost over the stock Supercharger pulley, therefore a tune is be recommended.
- Boost output from an Eaton M62 supercharger with the 75mm pulley is between 6 – 8 PSI intercooled, for the 2.5 – 3L 6 cylinders engines and 8-12+ PSI on 4 cylinder engines that are under 2L.
- When installing the pulley be sure to follow the instalaltion guide and reuse the shims (usually 3) that are already inside your stock supercharger pulley. Failure to do so will result in damage to the supercharger and pulley.
- This pulley works with the Mercedes Eaton M62 Supercharger only. Eaton M62 Supercharger for the Mercedes Benz Part Numbers A1110900380, 1110900380, A1110960099KZ, found in the following models:
1998-03 Mercedes C Class C230 2.3L, I-4,
1998-04 Mercedes SLK230 Roadster 2.3L, I-4,
2002-04 Mercedes SLK32 AMG Roadster 3.2L V6
2000 Mercedes Benz C320 3.2L V6 All SLK
Please consult the installation guide for more information.
Currently Out of Stock, Back in Stock in October – November 2024.
Additional information
Weight | .600 kg |
---|---|
Fitment | Fits all M62 Superchargers with Mercedes Benz with Part Numbers A1110900380, 1110900380, A1110960099KZ found in the following: 1998-03 Mercedes C Class C230 2.3L, I-4, 1998-04 Mercedes SLK230 Roadster 2.3L, I-4, M62 3rd 2002-04 Mercedes SLK32 AMG Roadster 3.2L V6 2000 Mercedes Benz C320 3.2L V6 All SLK |
Boost Output | Dependent on Motor & Intercooler used. |
Technical Details: | Machined Aluminum, Silver, Laser Engraved. 4x M6 Threaded holes and grooved shaft. |
RELATED PRODUCTS
-
V3.62 Gen.3 Supercharger Kit
- $1,369
- Add to cart
- Supercharger Kits, 6 Cylinder Engines, BMW M50, M52, M54, S50, S52, S54
M62 Supercharger
-
Intercooler Kit
- $474
- Add to cart
- Parts & Accessories, Intercooler
Manufactured by Hyde Motor Works
-
- Sale!
NEMESIS I Supercharger Kit
- Original price was: $1,843.$1,580Current price is: $1,580.
- Add to cart
- Supercharger Kits, 4 Cylinder Engines, BMW N42, N43, N46 Engines, Pre Orders
M62 Supercharger