BMW

V2.1 Revision Whiteprints For SC14 Available Now

  • Post author:
  • Reading time:1 mins read

Introducing the V2.1 Revisions, Whiteprints & Precut Brackets Available Now! Code Named “German Girl”. These will fit anywhere, full support for the newer power steering brackets found in the S54/M54 as well as M52TUB/S52 Motors.

Like its predecessor, V2.1 designs requires no welding at all and uses the same tried and tested simple Thick Plate Based Bolt on Bracket System for the SC14 Supercharger to be bolted into all following BMW 6 Cylinder Engines M50NV/M52/M54/S50/S52/S54 Based Motors.

Just follow the templates I send, Have the brackets cut out, drill out the holes, follow the installation guide, and bolt it all on!

Shipped to your Door!
V2 Iterations – Streamlined
Personal Use License

It fits M50NV, M50B20 M50B25, M50TUB, M52B28, M52B25, M52TU, M54B25, M54B28, M54B30, S50B30 – S50B32 (Euro), S52B30 – S52B32 (US) & S54B32.

Continue ReadingV2.1 Revision Whiteprints For SC14 Available Now

HMW M52 Prototype Supercharged BMW Setup in Action!!

  • Post author:
  • Reading time:1 mins read

The much awaited HMW M52 Prototype Demonstration video, SC14 Roots Supercharged BMW Driving around Northland, New Zealand, To show case just how reliable and solid my DIY Supercharged Budget setup is even without any tunes.

4 PSI 103mm Pulley, #21.5 Stock Injectors, Stock DME, Stock MAF, M50 Manifold, No Tune.

Music – Black Sabbath song ‘Iron Man’, Instrumental variation performed by Deano Silk Music. Enjoy 🙂

Continue ReadingHMW M52 Prototype Supercharged BMW Setup in Action!!

V1 Supercharger Brackets Whiteprints for S52/M52/M54/M50TU

  • Post author:
  • Reading time:2 mins read

Originally Tailored for the BMW E36 & E46 M3, 328i, 325i, 323i, 330i. The System was a tried and tested step stone and versatile enough for most 6 Cylinder M52x line of BMW motors with VANOS. It was a heavy rigged construction, one undoubtedly with racing conditions in mind and unrivaled in terms of being lite & offering long term durability, but not without its complexity of build. Due to the bracket replacing the whole OEM Power Steering Pump & Reservoir mounting bracket and incorporates it all in one easy to bolt together and easily revertible assembly; it retains all OEM Drive Accessories as the Alternator, AC and Power Steering in their original positions! This makes this design and all its successors of building a Supercharged BMW to be easily suited to not only a M52B28 But the M50TUB, M54B28, M54B30, and S52 US.

The Final Product:

White Prints:

Continue ReadingV1 Supercharger Brackets Whiteprints for S52/M52/M54/M50TU
Newer Posts
Older Posts