whiteprints

V2.1 Revision Whiteprints For SC14 Available Now

  • Beitrags-Autor:
  • Lesedauer:1 min Lesezeit

Introducing the V2.1 Revisions, Whiteprints & Precut Brackets Available Now! Code Named “German Girl”. These will fit anywhere, full support for the newer power steering brackets found in the S54/M54 as well as M52TUB/S52 Motors.

Like its predecessor, V2.1 designs requires no welding at all and uses the same tried and tested simple Thick Plate Based Bolt on Bracket System for the SC14 Supercharger to be bolted into all following BMW 6 Cylinder Engines M50NV/M52/M54/S50/S52/S54 Based Motors.

Just follow the templates I send, Have the brackets cut out, drill out the holes, follow the installation guide, and bolt it all on!

Shipped to your Door!
V2 Iterations – Streamlined
Personal Use License

It fits M50NV, M50B20 M50B25, M50TUB, M52B28, M52B25, M52TU, M54B25, M54B28, M54B30, S50B30 – S50B32 (Euro), S52B30 – S52B32 (US) & S54B32.

WeiterlesenV2.1 Revision Whiteprints For SC14 Available Now

V2 Simple SC14 Supercharger Brackets for BMW’s

  • Beitrags-Autor:
  • Lesedauer:2 min Lesezeit

The V2 Evolution of the our Original SC14 Supercharger Brackets for BMW’s are available now. Unlike the V1, These V2 design requires no welding at all. Its a simple Thick Plate Based Bolt on Bracket System that now truly offers an simple universal fitment of the SC14 Supercharger into all BMW 6 Cylinder M50NV/M52/M54/S50/S52/S54 Based Motors.

The HMW V2 Design Replaces the Power Steering Bracket as a whole as well as cleverly comes around the alternator and bmw belt tensioner to secure itself onto the motor, On top of that there is the addition of top brackets to offer more rigidness to the setup.

Update: 20th Oct 2016 – V2.1 Revisions Available Now!

Economical & Elegant
WeiterlesenV2 Simple SC14 Supercharger Brackets for BMW’s