Mercedes Kompressor

SALE – V3.62 Supercharger Kit & M62 60MM Pulley

  • Beitrags-Autor:
  • Lesedauer:2 min Lesezeit
Mehr über den Artikel erfahren SALE – V3.62 Supercharger Kit & M62 60MM Pulley

Available now, the V3.62 Supercharger Kit from Hyde Motor Works is capable of up to 8 PSI of boost. The V3.62 Supercharger Kit uses the Eaton M62 Supercharger and works on the BMW M50, M52, M54 engines found in BMW 3 series, 5 series & 7 series, as well as the BMW S50, S52 and S54 engines from the BMW M3 line.

Eaton M62 60mm Pulley from HMW
Hyde Motor Works 60mm Pulley for Eaton M62 Supercharger

We are also offering our custom 60mm M62 Supercharger Pulley for the Eaton M62 Supercharger that was commonly used in the Mercedes Benz C 230 Kompressor. Our custom pulley comes with its own bearing and can be easily installed to replace the OEM clutched electromagnetic pulley of the M62 Supercharger to gain more boost pressure. We highly recommended a proper tune to support higher boost pressure and engine power.

Erhalte 5% 10% off by using the promo code below!
V362SALE
Extended till May 5th 2022 (Updated 5th April)


The correct part numbers for the M62 Supercharger are listed below for convenience:
A 1110900380, A1110900380, A 111 096 00 99 KZ, 111 0900080.

WeiterlesenSALE – V3.62 Supercharger Kit & M62 60MM Pulley

HMW V3 Brackets for Eaton M62 & M90 Released

  • Beitrags-Autor:
  • Lesedauer:2 min Lesezeit
Mehr über den Artikel erfahren HMW V3 Brackets for Eaton M62 & M90 Released

After nearly a year and a half of delays, and many revisions at the HMW K.C. production house, we are finally ready to announce the release of our V3 Eaton M62 and M90 Supercharger Bracket Kit for the BMW M5x and S5x series of engines.

The V3 was originally meant as an budget friendly alternative for the European BMW enthusiast wanting to get into forced induction. The V3 natively supports the small case M62 and M90 superchargers that are commonly found in the Mercedes Kompressor models as the 230, the Jaguar XJ (X308), the Aston Martin V8 Vantage and the Ford Thunderbird among others. The small Eaton M45 from the BMW Mini can also be retro fitted although due to its smaller displacement, it’s not officially supported.

As with all HMW kits, The V3 was developed around support for the 6 Cylinder M50, M50TU, M52, M52TU, M54, S50, S52, S54 Motors. The M90 Requires the use of a Custom HMW SS Manifold while the M62 fits under the M50 & M52 Manifold, the M54 users will be required to switch to the earlier M50 & M52 Manifold or the HMW SS Manifold to gain full clearance.

The HMW V3 kit will shortly be available to purchase from the HMW Official Shop as well as directly through us or our distributors.

WeiterlesenHMW V3 Brackets for Eaton M62 & M90 Released