Hyde Motor Works

V2.1 Revision Whiteprints For SC14 Available Now

  • Beitrags-Autor:
  • Lesedauer:1 min Lesezeit

Introducing the V2.1 Revisions, Whiteprints & Precut Brackets Available Now! Code Named “German Girl”. These will fit anywhere, full support for the newer power steering brackets found in the S54/M54 as well as M52TUB/S52 Motors.

Like its predecessor, V2.1 designs requires no welding at all and uses the same tried and tested simple Thick Plate Based Bolt on Bracket System for the SC14 Supercharger to be bolted into all following BMW 6 Cylinder Engines M50NV/M52/M54/S50/S52/S54 Based Motors.

Just follow the templates I send, Have the brackets cut out, drill out the holes, follow the installation guide, and bolt it all on!

Shipped to your Door!
V2 Iterations – Streamlined
Personal Use License

It fits M50NV, M50B20 M50B25, M50TUB, M52B28, M52B25, M52TU, M54B25, M54B28, M54B30, S50B30 – S50B32 (Euro), S52B30 – S52B32 (US) & S54B32.

WeiterlesenV2.1 Revision Whiteprints For SC14 Available Now

V2 SC Belt Orientation Wrap Pulley Addon Upgrade for V1 Users

  • Beitrags-Autor:
  • Lesedauer:1 min Lesezeit

For users of the V1 Design, a Minor Evolution of the Bracket System, This adds a secondary pulley and changes the belt orientation slightly, allow more tension to be put on as well as allow more belt grip and wrap around the SC and alternator pulleys, specially needed when using smaller pulleys to eliminate any belt slip, this should also increase the boost due to the factors above.

Belt Routing
V1 to V2 Wrap Pulley Addon Plate

Image on the right is full scale copy of the template itself, which can be printed out to borderless A4 Paper, mind the dimensions.

WeiterlesenV2 SC Belt Orientation Wrap Pulley Addon Upgrade for V1 Users

HMW M52 Prototype Supercharged BMW Setup in Action!!

  • Beitrags-Autor:
  • Lesedauer:1 min Lesezeit

The much awaited HMW M52 Prototype Demonstration video, SC14 Roots Supercharged BMW Driving around Northland, New Zealand, To show case just how reliable and solid my DIY Supercharged Budget setup is even without any tunes.

4 PSI 103mm Pulley, #21.5 Stock Injectors, Stock DME, Stock MAF, M50 Manifold, No Tune.

Music – Black Sabbath song ‘Iron Man’, Instrumental variation performed by Deano Silk Music. Enjoy 🙂

WeiterlesenHMW M52 Prototype Supercharged BMW Setup in Action!!
Neuere Artikel
Ältere Artikel