Deutschland

O.T. M10 Kompressorkit auf Lager | Hergestellt für BMW M10-Motoren

  • Beitrags-Autor:
  • Lesedauer:3 min Lesezeit
Mehr über den Artikel erfahren O.T. M10 Supercharger Kit in Stock | Made for BMW M10 Engines

After years of development and testing, we are proud to have our BMW M10 Supercharger Kit, the O.T. M10 released and in stock!

Finished in a beautiful carbon black powder coating with fire orange accents and now available to order, the O.T. M10 is an affordable and reliable solution with a recorded 100% Engine HP increase at 163 Rear Wheel HP (200 Engine HP) over the stock power output, all that on a stock BMW M10 Engine.

The O.T. M10 is has been in development since 2020, by its designer and engineer, Travis Emmett from New South Wales, Australia. The whole setup was built around the Mercedes Eaton M45, also called M65 ( but not to be mistaken for the larger M62) roots type supercharger. This kit is capable of increasing the power output of the stock M10 Engine up to to the 200-250HP range as tested on the dyno.

O.T. M10 Supercharged Dyno Results

The BMW M10 Engine was used on the older BMW E30 and BMW 2002 models as well as the BMW 1800, 1802, E12, E21, E28 series of cars. This engine has a history to it for setting records in the racing world in mid 20th century. It was the base from which BMW Built the M12 used in Formula 1, known for making over 1400 HP.

The O.T. M10 Supercharger kit comes with its own custom crank pulley, custom alternator V belt pulley and its very own independent belt drive system. This allows you to upgrade your factory M10 engine generator to a more modern alternator while preserving the function of the stock belt driven engine accessories and running the entire kit independent to the factory drive belt, adding to the reliability and serviceability of the engine itself.

Following our mass production, the latest O.T. M10 kits are now in stock in Germany and in Australia, ready to be ordered from our official shop or any of our resellers.

Below you can watch the designer and engineer of all the Hyde Motor Works Old Timer projects, Travis himself showing the final results after a dyno done on this infamous O.T. M10 Supercharged BMW E30 with the legendary BMW M10 Engine!

We also currently have in the works a higher HP variant using the Rotrex C38 centrifugal supercharger, a video of the concept is also available on our Youtube Channel.

With the O.T. M10 Supercharger kit, you too can now reliably supercharge your old timer BMW M10 engine today!

WeiterlesenO.T. M10 Kompressorkit auf Lager | Hergestellt für BMW M10-Motoren

Featured Supercharged Build of August 2023

  • Beitrags-Autor:
  • Lesedauer:2 min Lesezeit
Mehr über den Artikel erfahren Featured Supercharged Build of August 2023

This month’s Featured Build takes us to Calgary in Alberta, Canada! This wonderful 1995 BMW E36 Supercharged 318Ti was built by Mathew Schmor. Mat first reached out to us earlier this year, asking us of his intent to supercharge the stock 4 Cylinder BMW M42/M44 engine using the M45 supercharger found in the Mini Cooper.

We quickly settled on a V4 M.O.A.B. 500 Kit, which is based on the AMR 500 supercharger, as the WMD 45 kit that supports the M45 supercharger was not yet ready. The M.O.A.B. 500 kit produces just under 5 PSI of boost which translates an additional 40-50HP + to the stock engine. For a 4 Cylinder BMW engine such as the M44B19 or the M42b18, which hovers around the sub 150HP mark, this pushes it to the level of the 6 Cylinder variants nearing 200HP’s with a more aggressive power band.

“Well we had a successful Saturday morning including some challenges. AMR 500 is fully operational with 4 pounds of boost recorded. We did some short test pulls mainly rolling from 2000 rpm to 5800-6000 rpm second gear shifting into 3rd.

As mentioned before we live pretty high. This set up at Sea Level would probably be reaching closer to 5 pounds of boost.
Consistency hitting 4 lbs of boost. Closer to sea level this unit would really be something.

In reality I am hitting about 2.5 lbs of boost above stock and it is still making the car way more fun to drive and the noises make me grin.”  – Mat

The car has been to the European Car show in Calgary, and the build was well documented on the 318Ti Forums.

For those interested in seeing a few videos, we have put up a small compilation with clips from Mat.

WeiterlesenFeatured Supercharged Build of August 2023

BMW M10 Supercharger Kit for BMW 2002, E30 & More

  • Beitrags-Autor:
  • Lesedauer:1 min Lesezeit
Mehr über den Artikel erfahren BMW M10 Supercharger Kit for BMW 2002, E30 & More

In der Entwicklung seit 2020, von seinem Designer und Ingenieur, Travis Emmett aus New South Wales, Australien. Dieses OT M10 Kit verwendet den Eaton M45 Supercharger (M65 Mercedes Variante), mit künftigen Plänen zur Unterstützung von Kompressoren wie dem SC14, Eaton M62 und Rotrex C38. Travis gibt uns ein Update zu diesem Kompressor-Kit für den legendären BMW M10-Motor, der in den älteren E30- und BMW 2002-Modellen sowie in den BMW 1800, 1802, E12, E21 und E28 zu finden ist.

Der BMW M10-Motor ist dafür bekannt, dass er Mitte des 20. Jahrhunderts Rekorde in der Rennsportwelt aufstellte. Auf seiner Basis baute BMW den M12, der in der Formel 1 eingesetzt wird und für seine maximale Leistung von 1400 PS bekannt ist.

Vorbestellungen für eine Markteinführung im Sommer 2023 sind ab sofort möglich! Kontaktiere uns! Noch heute!

Begleiten Sie Travis in seinem Video, in dem er Ihnen den Prototyp des OT M10 vorstellt.

 

WeiterlesenBMW M10 Supercharger Kit for BMW 2002, E30 & More
Ältere Artikel