-
- 6 Cylinder M5x/S5x, M3 330 328 325 528 530 Z4
V2x SC14 Supercharger Kits
- €1,150.00 – €1,700.00
- The award winning V2 based supercharger kits using the 1.4L SC14 roots supercharger. Complete support for all M50/M52/M54/S50/S52/S54 motors, slight variations for the Z4 & E30 chassis. A very strong setup for those who are new and are looking to add an additional +50-100RWHP to a stock motor. Average Power Curve: 260-300RWHP @ 5900 RPM Absolute Max Recorded Power: [email protected] 6200 RPM (See performance specifications below for more information)
- Select options
-
- 6 Cylinder M5x/S5x, M3 330 328 325 528 530 Z4
M1 KC Supercharger Kit
- €2,450.00
- This is the single most largest supercharger setup available for the BMW's yet. The setup makes use of the notorious Eaton M122H or an Eaton TVS 2300 Supercharger, found on the Mustang GT500 which is OEM capable of flowing 650HP. The M122H alone pushes 14 PSI out of the box and that is with an air to air intercooler. Boost can be restricted to 9PSI. And its capable of adding an extra 250-300+ HP to your usual M5x – S5x motor as long as the motor can handle it. Average Power Curve: 300RWHP - 450RWHP @ 5700 RPM (See performance…
- Add to cart
-
- 6 Cylinder M5x/S5x, M3 330 328 325 528 530 Z4
V3 Eaton Supercharger Kit
- €1,150.00 – €1,550.00
- This is a nice budget alternative to the traditional setups we offer, the V3 Series is based around utilizing the more efficient Eaton Superchargers. Based on the Eaton M62 & M90 superchargers with the short snout and body type commonly found in Jaguar V8, Mercedes Kompressor, Aston Martin & Ford Thunderbird. Includes our V3 series Eaton Bracket Kit, Throttlebody Relocation Dummy Manifolds, Custom Supercharger Manifolds, Spacers, Nuts & Bolts, Idler Pulleys, - All Powder coated. - 24 Months Craftsmanship Warranty** - Personal Support. Note: This kit includes all hardware and pipe work. To complete the installation you will require: Silicone…
- Select options
-
- 318 Ti Z3, 4 Cylinder M4x
V4 MOAB Supercharger Kits
- €950.00 – €1,350.00
- The V4 supercharger kit is for the BMW 318ti, 318i, 316i, & Z3 4 cylinder enthusiasts with the M42, M43 & M44 motors. This kit supports 4 different superchargers: The AMR 500, Eaton M45, M62 and the SC14. All the setups can be intercooled. Now you have the option of using any supercharger you like, all at a fraction of the cost.
- Select options
-
- Out of Stock
- 6 Cylinder M5x/S5x, Accessories
Straight Six Rev 4 Manifold
- €490.00
- This is the Hyde Motor Works Straight Six Manifold (SS in short) is an aluminum manifold made in house for forced induction use. This manifold replaces the stock BMW 6 cylinder engine intake manifold and hold up in Supercharger & Turbocharger applications where high boost is involved. It can also be used with naturally aspirated engines. These manifolds work on the BMW M50, M52 & S52 Engines. They require the M54 intake runner adapter for the M54 & M52TU Engines. Please keep in mind we expect new stock by January 2021. Final product will vary from pictures.
- Read more
-
-
- Out of Stock
- Accessories
Silicone Hose Kit
- €185.00
- A set of silicone hoses & couplers meant for our V2 supercharger kit, Also can be used with the V3 & V4 supercharger kits* Note: The M1 Kit does not use this silicone hoses and instead uses the intercooler setup. If you are buying and intercooler setup then that should have majority of pieces and you wont require it. Currently out of stock, back in stock on February 2021.
- Read more
-
-
- Accessories
Intercooler & Piping Kit
- €350.00
- An off the rack budget friendly 2.5" ID intercooler kit with good flow characteristics, The intercooler is modified to work well with all the HMW setups. 28" Black Aluminum intercooler with 2.5" ID Piping Kit. (See product description and additional information below for all details)
- Add to cart
-
- Accessories
Radiator Top Hose Adapter
- €16.00
- These 40mm hose adapters with the water temperature probes are made to easily modify to the existing top radiator hose, it is meant for the V2, V3 & V4 Kits, while the M1 uses it own top radiator hose. You can use this throughout the BMW M5x, S5x & M4x range of engines. Comes with two hose clamps and a temperature probe.
- Add to cart
-
- 4 Cylinder M4x, 6 Cylinder M5x/S5x, Accessories
HMW 80MM SC14 Pulley
- €150.00
- This HMW 80MM pulley for the SC14 will push between 6 - 8 PSI for the 6 cylinders & 15-20PSI on the 4 cylinders. Made as an High boost pulley for the V2 & V4 SC14 setups. Complete bolt on upgrade to an SC14 supercharger. Recommended to use this only after your installation and setup has been completed and you ensured there are no boost leaks, are happy with how the car runs, overall smoothness of the engine & a proper tune. Consider this the final touch. Currently available on back order, back in stock in January 2021.
- Add to cart
-
- Accessories
Supercharger Bearings
- €20.00
- High quality NSK Bearings meant for the HMW 80mm SC14 Supercharger Pulley. Please ensure you select the correct pulley based on your SC14 Supercharger being Type 1 or Type 2.
- Select options
-
- Accessories
Fuel Injectors
- €320.00 – €400.00
- A set of six (6) high resistance fuel injectors which replaces the Bosch EV1/EV6 style injectors found in the BMW 6 Cylinder M50, M52, M54, S50, S52, S54 engines. Available in either 42Ibs (440cc) or 60Ibs (600cc) sizes.
- Select options
-
- Accessories
HMW Grill Badge
- €16.00
- This is a high quality grill badge made originally for our special clients builds. This badge is molded and then handcrafted to a great degree. It attaches to your cars front grill with its threaded studs and bolts and backing plate. Display your support for our work and the kit you use.
- Add to cart
-
- 4 Cylinder M4x, 6 Cylinder M5x/S5x, Accessories
Spare Parts
- €30.00 – €250.00
- These are spare extra parts that are included with our kits. Should you have some missing parts or would like to buy them for another project, you will find them here.
- Select options
-
- 318 Ti Z3, 4 Cylinder M4x, Accessories
AMR 500 Supercharger
- €245.00
- The AMR 500 Supercharger is a small roots type unit with about 500CC displacement, its the heart of the V4 M.O.A.B Kit for a small bump in power on BMW 4 cylinder motors as M40, M42,M43 & M44. Good for an increase of about 30HP ~ 50HP.
- Add to cart
-
- 4 Cylinder M4x, 6 Cylinder M5x/S5x, Accessories
SC14 Supercharger
- €675.00
- The 1.4L SC14 Supercharger is the heart of our V2 based kits for the BMW 6 cylinder setups. It can also be used on the V4 M.O.A.B kit meant for the BMW 4 cylinders. Good for upto 100+ HP. Currently available on back order, back in stock in January 2021.
- Add to cart
-
- Accessories
M122H Supercharger
- €750.00
- The Eaton M122H is the ultimate modern roots supercharger, This is used for our HMW M122H K.C. Supercharger kit.
- Add to cart
OFFICIAL SHOP - HYDE MOTOR WORKS
FOR ALL YOUR BMW SUPERCHARGING NEEDS